EIGHT STANDARDS · ZERO VIOLATIONS

Certifications and
compliance standards.

Every facility we deliver meets or exceeds eight federal, military, and intelligence community standards for classified information protection. Every binder. Every walkthrough. Every time — accredited on day one.

● PASS RATE
100% ACCREDITED
● VIOLATIONS
ZERO TO DATE
● STANDARDS MET
8 MAJOR FRAMEWORKS
● EXPERIENCE
SINCE 2011

THE COMPLIANCE STACK

Compliance isn’t a checklist. It’s our operating system.

Every project starts with a Construction Security Plan reviewed by your SSO. Every wall, penetration, and emanation pathway is documented, tested, and certified. The compliance binder ships with the facility — as-built drawings, RF and STC reports, IDS commissioning records, and the full matrix mapping every requirement to the standard it satisfies.

STANDARD 01

ICD 705

Intelligence Community Directive

Physical and technical security standards for SCIFs across the entire U.S. Intelligence Community. The baseline directive every SCIF in the IC must meet.

  • Construction security
  • Acoustic protection
  • Access control
  • Tech surveillance countermeasures

STANDARD 02

JAFAN 6/9

Joint Air Force-Army-Navy

Physical security standards for Sensitive Compartmented Information and Special Access Program Facilities. Required for SAPF accreditation across all service branches.

  • SAPF construction
  • Closed-area work
  • SAP control points
  • Program-specific addenda

STANDARD 03

UFC 4-010-05

Unified Facilities Criteria

Security Engineering Facilities Planning Manual. DoD-wide standard governing physical security planning, design, and construction across all service branches and agencies.

  • Anti-terrorism standards
  • Progressive collapse
  • Blast resistance
  • Standoff requirements

STANDARD 04

UL 2050

National Industrial Security

Underwriters Laboratories certification for intrusion detection system installation, monitoring, and signal processing. Required for any IDS protecting classified information.

  • IDS certification
  • Alarm monitoring
  • Response protocols
  • Signal integrity

STANDARD 05

TEMPEST

NSA Emanation Security

National Security Agency standards governing compromising electromagnetic emanations from classified equipment. Levels I and II delivered as standard, Level III available.

  • Level I and II standard
  • RF shielded construction
  • Shielded penetrations
  • Emanation test reports

STANDARD 06

NISPOM

32 CFR Part 117

National Industrial Security Program Operating Manual. Governs how cleared contractors protect classified information and execute classified contracts for the U.S. Government.

  • Cleared contractor ops
  • Personnel security
  • Information security
  • DCSA oversight

STANDARD 07

NFPA / NEC

Life Safety and Electrical

National Fire Protection Association and National Electrical Code compliance. Every facility passes AHJ fire marshal inspection and electrical permitting on first walkthrough.

  • NFPA 70 / 72 / 101
  • Fire suppression
  • Emergency egress
  • Electrical permitting

STANDARD 08

IBC

International Building Code

Foundational building code compliance for structural, occupancy, and accessibility requirements. Engineered and stamped by licensed PEs for the AHJ in every installation jurisdiction.

  • Structural design
  • Occupancy classification
  • ADA accessibility
  • PE stamped plans

CERTIFICATION 09

WOSB

Woman-Owned Small Business

SBA-certified Woman-Owned Small Business. Eligible for federal WOSB and EDWOSB set-aside contracts, with full documentation on file via SAM.gov and the SBA certify portal.

  • SBA WOSB certified
  • SAM.gov registered
  • Set-aside eligible
  • Federal contract ready

THE ACCREDITATION PROCESS

Five steps from CSP to AO sign-off.

Accreditation isn’t a stage at the end. It runs in parallel with construction so the facility is ready for your SSO and AO walkthrough the day it’s commissioned.

01
CSP Drafted
Construction Security Plan reviewed by your SSO before any work begins.
02
Build to Spec
Panelized fabrication off-site in parallel with site prep. Cleared personnel only.
03
Test and Verify
RF shielding test, STC sound test, IDS commissioning, UL 2050 certification.
04
Binder Ships
As-builts, test reports, compliance matrix, and certifications delivered with the facility.
05
AO Walkthrough
Your Authorizing Official signs off. Facility is operational and accredited.

COMMON QUESTIONS

What SSOs and AOs ask first.

Do you guarantee accreditation on the first walkthrough?

Our facilities are engineered, built, and tested to the relevant standard before delivery, with a complete compliance binder shipping alongside the structure. Across the facilities we have delivered, every one has passed accreditation. We can’t guarantee a specific outcome because the AO signs the accreditation — but we can guarantee the facility meets the standard, and that is documented in writing.

As-built architectural drawings, RF shielding test reports, STC sound attenuation reports, fire suppression and IDS commissioning records, UL 2050 alarm certification, TEMPEST emanation test data, and a full ICD 705 plus JAFAN 6/9 compliance matrix mapping every requirement to the section of the facility that satisfies it.

Yes. Our 20-foot and 40-foot ISO container SCIFs are designed and tested as relocatable facilities under ICD 705. They ship with the same compliance binder as permanent installations and are accredited by the receiving SSO and AO at the deployment site.

Yes. We build to JAFAN 6/9 and any program-specific addenda for SAPF accreditation, including closed-area work spaces, dedicated SAP control points, and SAPF-compliant storage. Engagements begin with a Construction Security Plan reviewed by your program SSO.

All facilities ship with TEMPEST emanation test reports for the level you specify, Level I and II as standard. Testing is performed by independent certified TEMPEST authorities and documented in the compliance binder. Level III is available on request.

Yes. SCIF Global Technologies is SBA-certified Woman-Owned Small Business with current registration on SAM.gov, eligible for WOSB and EDWOSB set-aside contracts. UEI, CAGE, and NAICS codes available on request for solicitation matching.

Need our compliance package? We’ll send it today.

For RFP/RFQ responses, source selection, and pre-award compliance reviews, we provide certification copies, sample test reports, and our standard compliance matrix on request — typically within one business day.